Work Positioning Ropes

Retaining ropes

Work positioning ropes provide work positioning for height work on ladders, steel scaffolds and other equipment, and must not be used as fall protection equipment. They are only to be used in all point attachment, i.e. they must always be attached by rope connection to a holding eyelet of a harness. For work positioning ropes with adjustable length, the best possible working length can be obtained by fall arrester KB2.

 

EN 358

Work Positioning Rope S14KM

 

Work Positioning Rope S14KM

with fall arrester KB2, standard EN 358, one side carabiner RH20, other side stitched end and fall arrester KB2 with carabiner

 


  • Length: 1,5m   with MTK 2985 at KB2     Ident-No. 178218
  • Length: 2,0m   with MTK 2985 at KB2     Ident-No. 178338

  • Length: 1,5m   with MBK 2202 at KB2     Ident-No. 178160
  • Length: 2,0m   with MBK 2202 at KB2     Ident-No. 178161

Work Positioning Rope S14KM Protect

Work Positioning Rope S14KM Protect

with fall arrester KB2, standard EN 358, one side carabiner RH20, other side stitched end and fall arrester KB2 with trilock carabiner MTK 2985 and protective tube.

 


  • Length: 1,5m   Ident-No. 179340
  • Length: 2,0m   Ident-No. 179350
  • Length: 3,0m   Ident-No. 179371

Work Positioning Rope S14KM (fixed length)

 

Lanyard / Work Positioning Rope S14KM

with fixed length, standard EN 354, one side carabiner RH60, other side carabiner MTK 2461

  • Length: 0,7m   Ident-No. 178340
  • Length: 1,0m   Ident-No. 178883
  • Length: 1,2m   Ident-No. 178339