Work Positioning Ropes

Retaining ropes

Work positioning ropes provide work positioning for height work on ladders, steel scaffolds and other equipment, and must not be used as fall protection equipment. They are only to be used in all point attachment, i.e. they must always be attached by rope connection to a holding eyelet of a harness. For work positioning ropes with adjustable length, the best possible working length can be obtained by fall arrester KB2.

 

EN 358

Work Positioning Rope S14KM

Work Positioning Rope S14KM

with fall arrester KB2, standard EN 355, one side carabiner RH20, other side stitched end and fall arrester KB2 with carabiner MTK 2461



  • Length: 1,5m   Ident-No. 178218

  • Length: 2,0m   Ident-No. 178338

Work Positioning Rope S14KM (fixed length)

Work Positioning Rope S14KM

with fixed length, standard EN 355, one side carabiner RH60, other side carabiner MTK 2461



  • Length: 0,7m   Ident-No. 178340

  • Length: 1,2m   Ident-No. 178339

Retaining rope S16

Work Positioning Rope S16

with fall arrester KB2 mit FSA25, standard EN 358, one side carabiner RH20, other side spliced end and fall arrester KB2 with carabiner MBK 2202, integrated protection tube.



  • Length: 1,5m   Ident-No. 174612

  • Length: 2,0m   Ident-No. 174545

Work Positioning Rope S14KM

Work Positioning Rope S16

with fall arrester KB2 mit FSA25, standard EN 358, one side carabiner FSA25, other side spliced end and fall arrester KB2 with carabiner MBK 2202, integrated protection tube.



  • Length: 1,5m   Ident-No. 171826

  • Length: 2,0m   Ident-No. 172987